Email     Print Products > Automotive Oscilloscope > MaxiScope MP408

MaxiScope MP408

The MaxiScope MP408 is a PC based 4-channel automotive oscilloscope. It works in combination with your PC or MaxiSys Tablet, which turns into a powerful diagnostic tool, providing you an insight to the inner workings of a vehicle’s electronic circuits. Featuring the user-friendly UI design combined with the unrivalled hardware specs, the MP408 system is able to measure and test virtually all the electrical and electronic components and circuits in any modern vehicles. Power for the MaxiScope MP408 Module comes directly from the USB port of the connected PC, making the system very versatile and portable to use.

  • Features one-click auto setup of voltage scale and time base

    Works on all makes and models of modern vehicles

    Compatible with LIN, CAN and FlexRay data bus standards

    Reads and displays electrical signals in high resolution waveforms

    Allows manual editing of measurement parameter display

    Saves and reviews waveform data

    Features color coded 4-channel control panel

    Intuitive UI design features easy trigger point adjustment and real time scale info display

    Direct power supply through USB connection

    Free online software update through the Internet

    Portable design with strong housing and protective rubber boot

  • Vertical resolution 12 bits
    Channels 4
    Bandwidth 20MHz
    Accuracy 1%
    Sensitivity 10mV/div to 20V/div
    PC Interface USB 2.0 – Cable supplied
    Power Requirements Powered from USB port
    Input Ranges (full scale) ±v50mV to ±100V in 11 ranges
    Input Impedance 1MΩ in parallel with 22pF
    Input Type Single-ended, BNC connector
    Input Coupling Software selectable AC/DC
    Overload Protection ±200V on single input
    Buffer Memory 32M samples shared among active channels
    Waveform Buffer Up to 1000 waveforms
    Timebase Ranges 100ns/div to 1000s/div
    Operating Temperature Range 0°C to 50°C (15°C to 40°C for quoted accuracy)
    Storage Temperature Range -20°C to +60°C
    Storage Humidity Range 5% to 95%RH, Non-condensing
    Dimensions 190X115X38mm
    Weight < 0.5kg
    Maximum Sampling Rate (Single Shot)
    1 or 2 channels in use 80MS/s
    3 or 4 channels in use 20MS/s
  • 1.5m USB Cable X1
    3m (10ft) Screened Test Leads - X4
    Secondary Ignition Pickup - X1
    2-pin Breakout Lead - X1
    Attenuators 20:1 - X2
    Large Crocodile Clip Set - X1 Pair
    Small Crocodile Clip Set - X1 Pair
    Acupuncture Probe Set - X1
    Multimeter Probes – X1 Pair
  • Name Download
    MaxiScope for Android V1.15
    MaxiScope for PC V2.00
    MaxiScope Usermanual for PC V1.01
    MaxiScope App Installation Instructions (only for android)
    MaxiScope Usermanual for Android V1.00
 © Intelligent Technology Corp.,Ltd.2004-2015, All Rights Reserved.   Terms of Use   |   Privacy Policy